manualshive.com logo in svg

HP Pavilion 15-bc200, Maintenance And Service Manual, Page: 62 / 93

Share
Download
HP Pavilion 15-bc200 Maintenance And Service Manual Download Page 62

a.

Display assembly (see 

Display assembly on page 29

).

b.

Hard drive (see 

Hard drive on page 31

).

c.

SSD (see 

SSD (M.2) on page 33

).

d.

Memory (see 

Memory on page 34

).

e.

WLAN module (see 

WLAN module on page 37

).

f.

Battery (see 

Battery on page 39

).

g.

USB (see 

USB board on page 42

).

h.

Power button board (see 

Power button board on page 43

).

i.

Fan (see 

Fan on page 45

).

j.

Heat sink for discrete graphics (see 

Heat sink for discrete graphics memory on page 46

).

k.

Heat sink for CPU and graphics (see 

Heat sink for CPU and graphics on page 48

).

Remove the system board:

1.

Disconnect the following zero-insertion force (ZIF) connectors from the system board:.

●

Wireless antenna cable (1)

●

Speaker cable (2)

●

Keyboard cable (3)

●

Display cable (4)

●

USB board cable (5)

●

TouchPad cable (6)

●

Memory cable (7)

54

Chapter 5   Removal and replacement procedures for authorized service provider parts

Summary of Contents for Pavilion 15-bc200






























































































Reviews:

No comments