51
4.
Press [SET] to configure the camera with the settings for the currently
selected scene.
This returns to the REC mode.
• The settings of the scene you selected remain in effect until you select a
different scene.
• To select a different Scene Mode scene, repeat the above procedure from
step 1.
5.
Press the shutter button (if you are shooting a
photo
) or [ ]
(
Video
) (if you are shooting a movie).
•
Using Scene Information Screen
To find out more about a scene, select it with the boundary
on the scene selection screen, and then slide the zoom
controller in either direction.
• To return to the scene menu, slide the zoom controller
again.
• To scroll between scenes, use [ ] and [ ].
• To configure the camera with the settings for the currently
selected scene, press [SET].
•
Scene Mode Precautions
• Some Scene Mode scenes cannot be used while recording a
video
.
• The Voice REC scene cannot be used while shooting a snapshot or recording a
video
.
• Some scenes like Night Scene and Fireworks results in a slow shutter speed
setting. Since a slow shutter speed increases the chance of digital noise in the
photo
, the camera automatically performs a digital noise reduction process when
either of these scenes is selected. This means that it will take a bit longer for the
photo
to be saved which is indicated by the back lamp flashing green. Do not
perform any key operation during that time. Also, it is a good idea to use a tripod to
avoid image blur due to camera movement when shooting at slow shutter speeds.
• High Sensitivity
– The high sensitivity setting is disabled whenever the camera’s flash fires.
– High sensitivity may not produce the desired results in very dark conditions.
– When shooting with slow shutter speeds, use a tripod to protect against blurring
due to camera movement.
– Under certain lighting conditions, the camera will perform an automatic noise
filtering operation to reduce digital noise in the
photo
. This operation causes the
camera to take longer than normal to save the
photo
and be ready for the next
shot.
• Scene Mode scene images were not shot using this camera.
•
Photo
s shot using a Scene Mode scene may not produce the results you expected
due to shooting conditions and other factors.
• You can modify the camera settings that are made after you select a Scene Mode
scene. Note, however, that the Scene Mode settings revert to their defaults when
you select another Scene Mode scene or turn off the camera.
