background image

Chapter 1 

Quick Start 

If you plan to connect to the HP Server Remote Management Card via 
the LAN:

  

◊ 

Verify that the client has TCP/IP software is installed and it is properly 
configured for your LAN (client's IP address, subnet mask, and 
gateway) by checking the TCP/IP protocol properties from the 
Network program in the control panel.  

◊ 

Verify your client's browser's proxy settings. If your site uses a proxy 
server, enter the IP address of the HP Server Remote Management 
Card in the browser's exceptions list to bypass it. If you are using 
DHCP, reboot the server and run the HP Server Remote Management 
Card BIOS setup program to see the assigned IP address. 

And/or: 

If you plan to connect to the HP Server Remote Management Card via 
modem (PPP): 

 

Verify your client's PPP settings. Double-click the "My Computer" icon on 
your desktop and then double-click Dial-up Networking. Add an entry and 
define its properties (modem, initialization string, server PPP and TCP/IP 
setup, login script). If you wish to use server dialback, you may configure 
it via the HP Server Remote Management Card web interface after you 
first login. 

 

5.  Make your first remote connection using the HP Server Remote 

Management Card's web interface (see next section). 

Make your first remote connection (see Chapter 5 for detailed instructions):  

From the remote client, connect to the HP Server Remote Management Card via 
LAN or modem connection. 

 

1.  If you are using a modem (PPP) at the remote client (proceed to step 2 if 

you are not), make your connection using the Dial-Up Networking 
program. Once your connection has been established, proceed to step 2. 

 

2.  At the remote client, start your web browser software. 

 

3.  Enter the URL address of the HP Server Remote Management Card, which 

should be 

one

 of the following: 

◊ 

If connecting via LAN, enter either the card's IP address (for example: 
http://xxx.xxx.xxx.xxx/), or a host name, if one has been assigned to 
the HP Server Remote Management Card in your DNS server (for 
example: http://

cardname

.

companyname

.com). 

Summary of Contents for P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade


























































































































Reviews: