HP NC320m - PCI Express Gigabit Server Adapter User Manual Download Page 13

Page: 13 / 43

Using Virus Throttle 13

Click

Software & Driver Downloads

from the left menu bar.

Type the product name in the

For product

box and press

Enter

. For example, type NC370T.

Select an operating system.

Click

HP Virus Throttle for Windows

to download the HP Virus Throttle component pack

(cp######.exe) file. The component pack file is a self-extracting executable with a file name based

on the component pack number.

Click the component pack executable file and follow the directions on the screen to install Virus
Throttle.

When installation is complete, the Virus Throttle tray icon appears in the Windows taskbar on the

desktop. This icon is used to open the Virus Throttle Status and Configuration Utility.

To Install Virus Throttle for Windows using the HP cmponent.htm file:

Go to the HP website (

http://www.hp.com

Click

Software & Driver Downloads

from the left menu bar.

Type the product name in the

For product

box and press

Enter

. For example, type NC370T.

Select your Operating System software.

Click

HP ProLiant Networking Software

Click

download

and save the HP SoftPaq (sp#####.exe) file to a directory on your hard drive. The

SoftPaq file is a self-extracting executable with a file name based on the SoftPaq number.

Click the SoftPaq file to extract the files and then open the

cmponent.htm

file.

Click the

HP Virus Throttle link

. If a valid INP license is identified on the system, Virus Throttle

installation continues. If the utility does not identify a valid INP license on the system, the following

message appears:

Click

Yes

to install a license key. The ProLiant Essentials Network License Manager appears. Refer to

"About ProLiant Essentials Network License Manager (on page

)." After you install a license key on

the system, the Virus Throttle installation continues automatically.

When installation is complete, the Virus Throttle tray icon appears in the Windows taskbar on the

desktop. This icon is used to open the Virus Throttle Status and Configuration Utility.

Monitoring Virus Throttle status

The Status tab displays overall status, statistics, and delay queue information that has been captured since

the Virus Throttle filter drivers were initialized. The filter drivers are initialized upon reboot and when any

Summary of Contents for NC320m - PCI Express Gigabit Server Adapter












































Search results

Summary of Contents for NC320m - PCI Express Gigabit Server Adapter

Reviews:

Related manuals for NC320m - PCI Express Gigabit Server Adapter

Brands by name

Popular brands

HP NC320m - PCI Express Gigabit Server Adapter, User Manual

Search results

Summary of Contents for NC320m - PCI Express Gigabit Server Adapter

Reviews:

Related manuals for NC320m - PCI Express Gigabit Server Adapter

Brands by name

Popular brands