Figure 29
Install an antenna
CAUTION:
•
Do not touch the antenna top, especially after the antenna is connected with the grounding contact.
Otherwise electrostatic discharge (ESD) may damage the router.
•
To ensure signal quality, use antennae supplied with the router.
Installing interface modules
Installing a SIC interface module
CAUTION:
Before installing an interface module, make sure the router is powered off. If not, power off the router.
To install a SIC interface module:
1.
Remove the screws of the filler panel by using a Phillips screwdriver, and then remove the filler
panel.
2.
Push the SIC interface module into the SIC slot along the slide rails until it closely mates with the
rear panel of the router.
3.
Use a flat-blade screwdriver to fasten the captive screws to fix the SIC interface module to the
router.
Figure 30
Install the SIC interface module
Installing a DSIC interface module
CAUTION:
Before installing an interface module, make sure the router is powered off. If not, power off the router.
21
