Installing the router
WARNING!
To avoid bodily injury, do not touch any naked wires and terminals, and parts with a high-voltage hazard
sign.
NOTE:
•
The barcode stuck on the router chassis contains information about production and servicing. Before you
return a faulty router for serving, please provide the barcode information of the router to your local sales
agent.
•
An HP tamper-proof label is stuck on a mounting screw on the router chassis. The local sales agent
requires intactness of the tamper-proof label when maintaining the router. Therefore, before you open
the chassis cover, please contact your local sales agent to ask for permission or follow the instruction as
provided by the agent; otherwise, the user takes full responsibility for own operation if any maintenance
failure occurs.
Check before installation
•
You have read through the chapter “Preparing for installation” carefully.
•
All requirements in the chapter “Preparing for installation” are satisfied.
Installation flow
You can select one of the following installation methods, and follow the installation procedures shown
in
Figure 20
to install your router.
•
Install the router to a workbench
•
Install the router to a wall
•
Install the router to a 19-inch rack
14
