Setup 15
2.
Prepare the uplink module for installation.
3.
Install the uplink module.
4.
Do one of the following:
o
If the switch module is already installed, verify the uplink module powers on and the health LED is
green.
o
If the switch module is not installed, install the switch module before verifying LEDs.
For more information, see the "Installation information and guidelines (on page
)."
5.
After both components have been installed, verify the switch firmware is at the recommended firmware
version. For more information, see the HP website
The installation is complete.
Installing the switch module
CAUTION:
To avoid connectivity loss, do not remove switches already in operation.
To install the switch module:
1.
Extend the chassis from the rack (on page
2.
