Setup 13
Setup
Installation information and guidelines
Before installing the module, review the following:
•
Always install the switch module and the uplink module in corresponding bays. Both components must
be installed for normal operation.
•
The switch module and the uplink module can be installed in any order.
•
The switch module and the uplink module power down when either module is removed from the chassis.
•
The switch module and the uplink module power up after both modules are installed in the chassis.
•
Removing any component from bay A or bay B does not disrupt traffic for the other switch.
•
Always use the recommended firmware version. For current information on recommended firmware
versions, see the HP website •
For the most current product information, see the HP Moonshot Information Library
