HP Mini 210-2000 - PC User Manual Download

Page: 60 / 67

●

Be sure that the wireless router or access point is properly connected to its power adapter and to
the cable or DSL modem, and that the lights are on.

●

Disconnect and then reconnect all cables, and turn the power off and then back on.

Contacting customer support

If the information provided in this guide does not address your questions, you can contact HP
Customer Support at:

http://www.hp.com/go/contactHP

NOTE:

For worldwide support, click

Contact HP worldwide

on the left side of the page, or go to

http://welcome.hp.com/country/us/en/wwcontact_us.html

Here you can:

●

Chat online with an HP technician.

NOTE:

When technical support chat is not available in a particular language, it is available in

English.

●

E-mail HP Customer Support.

●

Find HP Customer Support worldwide telephone numbers.

●

Locate an HP service center.

Appendix A Troubleshooting and support

Summary of Contents for Mini 210-2000 - PC




































































Search results

Summary of Contents for Mini 210-2000 - PC

Reviews:

Related manuals for Mini 210-2000 - PC

Brands by name

Popular brands

HP Mini 210-2000 - PC, User Manual

Search results

Summary of Contents for Mini 210-2000 - PC

Reviews:

Related manuals for Mini 210-2000 - PC

Brands by name

Popular brands