HP MicroServe, User Manual, Page: 29 / 68

29
Network Interface Card Settings

NIC Selection enables to select which LAN port to use. The default value is “dedicated”.

MAC Address identifies this unique device on the network

Auto Negotiation toggles on/off the auto negotiation of the connection speed and duplex mode.
This is only applies if it is in dedicated NIC mode.

Network Speed enables to set the network speed to 10Mb or 100Mb to match your network
settings.

Duplex Mode enables you to set the duplex mode to full or half to match your network settings.

Common Settings

Enable Dynamic DNS allows registering the ProLiant MicroServer address with the DNS when
enabled.

Host Name-- when registering the ProLiant Micro Server with the DNS. The character set is a-z, A-
Z, 0~9, underscore (_) and dash (-), using between 0 and 64 characters and no white space, if
unspecified, the default name is MergePoint-EMS.

Use DHCP to obtain DNS Domain Name can be used to enable or disable the DHCP to acquire
the DNS Domain name.