HP MFP Analog Fax Accessory 300, Fax Manual

Page: 64 / 316

56 Chapter 3 Configuration
ENWW
4 Scroll down and touch FAX DESTINATION BIN to display the
settings screen.
5 Use the up and down arrows to select the number of the bin
(default=0), and then touch OK.
Blocking incoming faxes
The fax block list setting allows you to create a list of phone numbers
that, when a fax is received from a blocked phone number, the fax
does not print and is immediately deleted from memory.
Note
Only numbers can be entered into the fax block list. Do not use dashes
or spaces. If a fax is sent from a blocked phone number and the sender
uses a dash or a space in the number, the fax will not be blocked.
To create a blocked-fax list
1 On the control panel, press the Menu button to display the
main menu.
2 Touch FAX to display the fax menu.
3 Scroll down and touch FAX RECEIVE.
4 Scroll down and touch BLOCKED FAX LIST to display the
blocked fax menu.
5 Touch ADD BLOCKED NUMBER to display the keyboard.
6 Type a number and touch OK.
7 To add additional numbers, repeat steps 5 and 6.
To remove numbers from the blocked-fax list
1 On the control panel, press the Menu button to display the
main menu.
2 Touch FAX to display the fax menu.
3 Scroll down and touch FAX RECEIVE.
4 Touch BLOCKED FAX LIST to display the blocked fax menu.
5 Touch REMOVE BLOCKED NUMBER to display the list of
blocked phone numbers.
6 Scroll through the numbers to highlight one you wish to remove,
and then touch the phone number to remove it. Repeat this step
for any numbers you want to remove.
7 Touch OK to exit.