manualshive.com logo in svg

HP LaserJet 4100, Reference Manual

The HP LaserJet 4100 Fax Manual is a comprehensive user manual that provides step-by-step instructions for setting up and operating this high-performance printer. Available for free download from our website, it offers detailed guidance and troubleshooting tips to enhance your printing experience. Get your manual at manualshive.com.

Share
Download
background image

11-56   Soft Font Creation

EN

Orientation (UB)

Orientation byte specifies the orientation of the character. The 
orientation of the character must match the orientation of the font.

If the orientation is not supported or is different from the orientation 
specified in the font header, the character is discarded.

Left Offset (SI)

Left offset specifies the distance in dots from the reference point to 
the left side of the character pattern on the physical page coordinate 
system (this value is orientation dependent). The left and top offsets 
locate the character reference point about the cursor position (see 
Figure 11-6 and Figure 11-7).

PCL 5 printers support kerning (both negative left and right side 
bearings) of both fixed-pitch and proportionally-spaced fonts. Note 
that large offsets could place the character off the printable area of 
the page causing the character to be clipped.

The legal range for the left offset is –16384 to 16384 dots.

Top Offset (SI)

Top offset specifies the distance in dots from the reference point to 
the top of the character pattern on the physical coordinate system 
(this value is orientation dependent.) The left and top offsets locate 
the character reference point about the cursor position (see Figure 
11-6 and Figure 11-7). The legal range for the top offset is –16384 
to 16384 dots.

Table 11-39

Value Orientation

0 Portrait

1 Landscape

2 Reverse 

portrait

3 Reverse 

landscape

Summary of Contents for LaserJet 4100



















































































































































































































































































































































































Reviews:

No comments

Related manuals for LaserJet 4100

Janome 1108 Instruction Book preview
1108
Brand: Janome Pages: 59
Janome 109 Instruction Book preview
109
Brand: Janome Pages: 42
Panasonic KX-TG234SK Service Manual preview
KX-TG234SK
Brand: Panasonic Pages: 99
Kärcher 10067010 Operating Instructions Manual preview
10067010
Brand: Kärcher Pages: 55
Ricoh RB5020 Service Manual preview
RB5020
Brand: Ricoh Pages: 109
GBC GBC STL1000 Instruction Manual preview
GBC STL1000
Brand: GBC Pages: 43
Briteq BT-H2FOG II Operation Manual preview
BT-H2FOG II
Brand: Briteq Pages: 8
T-COM T-Fax 8500 Quick Reference Manual preview
T-Fax 8500
Brand: T-COM Pages: 6
Horizon Fitness QC-S300 Manual preview
QC-S300
Brand: Horizon Fitness Pages: 70
Oki FAX 5250 Service Manual preview
FAX 5250
Brand: Oki Pages: 653
Malanbao Blizzard 1200 Manual preview
Blizzard 1200
Brand: Malanbao Pages: 6
Nilfisk-Advance All-Purpose Matador Operator'S Manual preview
All-Purpose Matador
Brand: Nilfisk-Advance Pages: 15
Nilfisk-Advance Advolution 20 Instructions For Use Manual preview
Advolution 20
Brand: Nilfisk-Advance Pages: 30
JUKI DNU-1541-7 Instruction Manual preview
DNU-1541-7
Brand: JUKI Pages: 50
JUKI HZL-E61 Instruction Manual preview
HZL-E61
Brand: JUKI Pages: 72
JUKI HZL-27Z Instruction Manual preview
HZL-27Z
Brand: JUKI Pages: 48
Philips CD 155 (Spanish) Manual Del Usuario preview
CD 155
Brand: Philips Pages: 54
Philips CD 450 User Manual preview
CD 450
Brand: Philips Pages: 59

Brands by name

Popular brands

Load more brands