manualshive.com logo in svg

HP Kayak XA-s Series 02, User Manual

Share
Download
HP Kayak XA-s Series 02 User Manual Download Page 86

Appendix A   The Error Codes

1900h – 1902h:

DVD Error Codes

74

English

1900h – 1902h:

DVD Error Codes

8000h:

DiagTools Error Codes

9610h:

Matrox Video Error Codes

Code

Explanation

Details/Parts to Check

1900h

Critical or command error.

Place a valid DVD media and re-run the diagnostic test. If 
error persists, replace the DVD drive.

1901h

DVD seek test failed.

Check and replace the DVD media or the DVD drive.

1902h

DVD read test failed.

Check and replace the DVD media or the DVD drive.

Code

Explanation

Details/Parts to Check

8000h

Fails in executing an external 
program.

Make sure the external program is in the DiagTools 
directory.

Code

Explanation

Details/Parts to check

9610h

Matrox video chip test failed.

Video controller error.
If problem persists, install new:

•

video adapter (if installed in accessory slot), or

•

system board (if integrated on system board).

Summary of Contents for Kayak XA-s Series 02





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands