English
47
Appendix A The Error Codes
0100h – 01FFh:
Memory Error Codes
01A3h
L2 cache commands test failed.
Cache memory error.
If problem persists, install new:
•
L2 memory (if installed in accessory slot), or
•
processor (if integrated on the processor card).
01A4h
L2 cache read/write test failed.
Cache memory error.
If problem persists, install new:
•
L2 memory (if installed in accessory slot), or
•
processor (if integrated on the processor card).
01B0h
The pattern written at XXXXXXXX
YYYYYYYYh was qqqqh. The pattern
read back from that address was pppph.
Memory error. Run the test disabling the cache.
If problem persists, install new memory module.
If problem persists, install new system board.
01B1h
Parity failure at XXXXXXXX YYYYYYYYh
during pattern test.
Memory error. Replace appropriate memory module.
01B2h
The pattern written at XXXXXXXX
YYYYYYYYh was qqqqh. The pattern
read back from that address was pppph.
Memory error. Replace appropriate memory module.
01B3h
Data bus test failed.
Replace memory module.
Code
Explanation
Details/Parts to Check
Summary of Contents for Kayak XA-s Series 02
