manualshive.com logo in svg

HP Kayak XA-s Series 02, User Manual

Share
Download
HP Kayak XA-s Series 02 User Manual Download Page 77

English

65

Appendix A   The Error Codes

0C00h – 0CFFh:

IDE Tape Error Codes

0C00h – 0CFFh:

IDE Tape Error Codes

0A10h

Random play test failed. 
No data in Drive x.

CD-ROM error. Insert an audio CD in the CD-ROM 
drive and re-run the diagnostic test.

0A11h

No audio tracks in the multisession CD in 
drive x

CD-ROM error.
Insert an audio CD in the CD-ROM drive and re-run 
the diagnostic test.

0A12h

Number of audio tracks inadequate for 
the test.

CD-ROM error.
Insert another multisession CD in the CD-ROM drive 
and re-run the diagnostic test.

Code

Explanation

Details/Parts to Check

0C01h

No medium in tape drive n.

Insert a tape cartridge in the tape drive and re-run 
the test.

0C02h

Medium write protected.

Tape’s record switch is in write-protect position. 
Move the switch to record position.

0C03h

Rewind failed.

Change the tape in the tape drive and re-run the 
diagnostic test.

0C04h

Erase failed.

Change the tape in the tape drive and re-run the 
diagnostic test.

0C05h

Write failed.

Re-run the diagnostic test.

0C06h

Read failed.

Re-run the diagnostic test.

0C07h

Signature failed.

This message is displayed when the signature is not 
found. The write test writes a signature on the tape. 
First run the write test, and then the read test.

Code

Explanation

Details/Parts to Check

Summary of Contents for Kayak XA-s Series 02





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands