1
HP ProCurve High-Speed Transceivers
Installation Guide
Introduction
The HP ProCurve High-Speed Transceivers can be installed into a number
of HP ProCurve networking devices to provide 100 Mbps and 1000 Mbps
connections to other compatible network devices.
This document describes how to install, verify, and troubleshoot the
following HP ProCurve High-Speed Transceivers:
Use these transceivers for the following network connectivity:
■
Gigabit-SX transceiver—1000 Mbps operation over multimode fiber-
optic cable
■
Gigabit-LX transceiver—1000 Mbps operation over either single-
mode or multimode fiber-optic cable
■
100/1000-T transceiver—1000 or 100 Mbps operation over Category
5 or better unshielded twisted-pair (UTP) or shielded twisted-pair
(STP) cables
■
100-FX SC transceiver—100 Mbps operation over multimode fiber-
optic cable
For more information on the cables used with these transceivers and the
supported cable lengths, see page 4.
HP J4131A ProCurve Gigabit-SX Transceiver
HP J4132A ProCurve Gigabit-LX Transceiver
HP J4834A ProCurve 100/1000-T Transceiver
HP J4853A ProCurve 100-FX SC Transceiver
59692336.fm Page 1 Monday, October 9, 2000 4:08 PM
