13
English
Step 6: Set up your HP iPAQ
When you turn on your HP iPAQ for the first time, you are provided instructions to
help you set up your device. Use the stylus to enter information. The stylus is located
on the right, back side of the device as you look at the screen. (See the product
component illustrations for the location of the stylus.)
Changing Your Password
1.
Tap
Start
>
Settings > Lock > Password
tab.
2.
Enter your current password.
3.
In the Password box, enter your new password.
4.
On the
Hint
tab, enter a phrase that helps you remember your password,
but does not allow others to guess your password.
The hint is displayed after the incorrect password is entered four consecutive
times.
5.
When prompted, tap
OK.
For more details about passwords, refer to
Additional Product Information
located
on the
Getting Started
CD.
Finding the Serial Number and Model Number
Locate the Serial and Model numbers before contacting HP Customer Support,
particularly if you are calling for in-warranty support.
View the Serial Number and Model ID by tapping
Start > HP Help And
Support > Serial and Model Number.
You can also find this information underneath the battery of your HP iPAQ. To
locate the Serial and Model Numbers:
1.
Remove the battery cover.
2.
Remove the battery from the unit.
3.
Locate the label containing the Product ID and Serial Number underneath
the battery.
Resetting your HP iPAQ
You might need to perform a soft reset if your HP iPAQ stops responding. The two
types of resets are soft and clean.
399310-xx1.book Page 13 Friday, December 16, 2005 3:52 PM