11
English
1.
Insert one end of the AC adapter into the port on the bottom of the USB
synchronization cable connector.
2.
Connect the other end of the AC adapter to an electrical outlet.
3.
Connect the USB synchronization cable to the charging/communications
port on your HP iPAQ. The cable connector only fits one way, so do not
force it. If the connector does not insert easily, turn it over.
If you have a USB synchronization cradle/charger:
1.
Connect one end of the AC adapter to the cradle.
2.
Connect the other end of the AC adapter to an electrical outlet.
3.
With the front of the HP iPAQ facing the same direction as the front of the
cradle, align the charging/communications port on the HP iPAQ with the
connector in the cradle and slide the bottom of the HP iPAQ into the cradle.
IMPORTANT
Whenever a replacement battery is inserted into your HP iPAQ,
press and hold the
Power
button for at least two seconds or attach an AC
adapter to turn on your device.
Step 4: Insert the
Getting Started
CD into your computer
Use the
Getting Started
CD to complete the setup of your HP iPAQ and to
synchronize the HP iPAQ with your personal computer.
Insert the
Getting Started
CD into the CD drive of your personal computer. The
HP
Install Wizard
automatically opens, and the application starts to run.
IMPORTANT
Do you have administrative rights on your personal computer? If
not, you may have problems installing the applications from the
Getting Started
CD. Your administrator will need to install the applications.
Step 5: Follow the on-screen instructions on your personal computer
The
HP Install Wizard
installs:
•
Microsoft Outlook 2002
•
Microsoft ActiveSync
•
Other optional software applications
399310-xx1.book Page 11 Friday, December 16, 2005 3:52 PM