To perform more advanced operations, press
S
or
s
to launch the UEFI Shell.
To view the iLO 3 LAN configuration, press
I
or
i
to launch the iLO 3 Setup Tool.
Saving UEFI configuration settings
There are other UEFI settings you can configure at this time. For more UEFI configuration options,
see the HP Integrity BL860c i4, BL870c i4 & BL890c i4 Server Blade User Service Guide.
Booting and installing the operating system
From the
UEFI Front Page
prompt, you can boot and install in either of two manners:
•
If your OS is loaded onto your server blade, see
“Operating system is loaded onto the server
blade” (page 19)
.
•
If the OS is not installed onto your server blade, see
“Operating system is not loaded onto
the server blade” (page 19)
.
Operating system is loaded onto the server blade
If the OS is loaded on your server blade, normally UEFI will automatically boot to the OS. If the
UEFI Front Page is loaded, press
ENTER
to start auto boot, or
B
or
b
to select a specific boot option
for your OS.
•
Use your standard OS logon procedures, or see your OS documentation to log on to your
OS.
Operating system is not loaded onto the server blade
There are two options on how to load the OS if it is not loaded onto your server blade.
•
To load the OS from a DVD, see the HP Integrity BL860c i4, BL870c i4 & BL890c i4 Server
Blade User Service Guide.
•
To load the OS using Ignite-UX, see the HP Integrity BL860c i4, BL870c i4 & BL890c i4 Server
Blade User Service Guide.
OS login prompt
If your server blade is at the OS login prompt after you establish a connection to the server blade,
use your standard OS log in procedures, or see your OS documentation for the next steps.
Accessing UEFI or the OS from iLO 3 MP
19
