HP HPE ProLiant DX360 Gen10 User Manual Download Page 95

Page: 95 / 187

11. Install the primary PCI riser cage.

12. Install the access panel (Install the access panel).

13. Install the server in the rack.

14. Connect each power cord to the server.

15. Connect each power cord to the power source.

16. Power up the server.

Secondary PCI riser options

Installing a secondary full-height PCI riser cage option

When installed, this riser cage supports full-height, 3/4-length expansion boards up to 9.5". PCIe3 slot 2 is no longer
available.

Prerequisites

This option requires a dual processor configuration.

Before installing this option, be sure you have the following:

• The components included with the hardware option kit

• Any expansion boards or controllers you plan to install

• T-10 Torx screwdriver

• T-15 Torx screwdriver

Procedure

Power down the server (

Power down the server).

Remove all power:

Hardware options installation

Summary of Contents for HPE ProLiant DX360 Gen10




























































































































































































Search results

Summary of Contents for HPE ProLiant DX360 Gen10

Reviews:

Related manuals for HPE ProLiant DX360 Gen10

Brands by name

Popular brands

HP HPE ProLiant DX360 Gen10, User Manual

Search results

Summary of Contents for HPE ProLiant DX360 Gen10

Reviews:

Related manuals for HPE ProLiant DX360 Gen10

Brands by name

Popular brands