manualshive.com logo in svg

HP g14, Maintenance And Service Manual

Share
Download
HP g14 Maintenance And Service Manual Download Page 68

Fan

Description

Spare part number

Fan (includes cable)

746657-001

Before removing the fan, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the Battery (see 

Battery on page 29

), and then remove the following components:

a.

Service cover (see 

Service cover on page 30

)

b.

Hard drive (see 

Hard drive on page 31

)

c.

Optical drive (see 

Optical drive on page 38

)

d.

Keyboard (see 

Keyboard on page 40

)

e.

Top cover (see 

Top cover on page 43

)

f.

Speakers (see 

Speakers on page 50

)

g.

System board (see 

System board on page 53

)

h.

Heat sink (see 

Heat sink on page 57

)

Remove the fan:

1.

Remove the two Phillips PM1.9×4.6 screws 

(1)

 that secure the fan to the base enclosure.

60

Chapter 6   Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for g14


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands