manualshive.com logo in svg

HP g14, Maintenance And Service Manual

Share
Download
HP g14 Maintenance And Service Manual Download Page 29

Spare part number

Description

746660-001

Power connector cable

746664-001

Display panel cable

752237-001

4-cell, 41-WHr, 2.80-AHr, Li-ion battery

759263-001

Display enclosure

759264-001

Base enclosure

759265-001

Display bezel

759266-001

Audio/USB board (includes audio jack, USB port, and cable)

759267-001

14.0-in, HD, SVA display panel

759268-001

System board equipped with an Intel Core i5-4200U 1.60-GHz processor (dual core, 15 W, 3-MB
L3 cache), an AMD Radeon R5 M240 graphics subsystem with 2-GB of discrete memory, and a
non-Windows 8 operating system (includes replacement thermal material)

759268-501

System board equipped with an Intel Core i5-4200U 1.60-GHz processor (dual core, 15 W, 3-MB
L3 cache), an AMD Radeon R5 M240 graphics subsystem with 2-GB of discrete memory, and the
Windows 8 Standard operating system (includes replacement thermal material)

759269-001

System board equipped with an Intel Core i3-4010U 1.70-GHz processor (dual core, 15 W, 3-MB
L3 cache), an AMD Radeon R5 M240 graphics subsystem with 2-GB of discrete memory, and a
non-Windows 8 operating system (includes replacement thermal material)

759269-501

System board equipped with an Intel Core i3-4010U 1.70-GHz processor (dual core, 15 W, 3-MB
L3 cache), an AMD Radeon R5 M240 graphics subsystem with 2-GB of discrete memory, and the
Windows 8 Standard operating system (includes replacement thermal material)

759270-001

System board equipped with an Intel Celeron 2957U 1.40-GHz processor (dual core, 15 W, 2-MB
L3 cache), an AMD Radeon R5 M240 graphics subsystem with 2-GB of discrete memory, and a
non-Windows 8 operating system (includes replacement thermal material)

759270-501

System board equipped with an Intel Celeron 2957U 1.40-GHz processor (dual core, 15 W, 2-MB
L3 cache), an AMD Radeon R5 M240 graphics subsystem with 2-GB of discrete memory, and the
Windows 8 Standard operating system (includes replacement thermal material)

759271-001

Top cover (includes TouchPad and TouchPad cable)

759272-001

Webcamera/microphone module (includes double-sided adhesive)

760729-001

DVD±RW Double Layer with SuperMulti Drive

761807-001

Antenna Kit (includes left and right wireless antenna cables and transceivers)

761808-001

Display Hinge Kit (includes left and right display hinges)

761809-001

Plastics Kit (includes the memory module compartment cover, the optical drive bay space saver, and
the service cover)

NOTE:

See 

Plastics Kit on page 18

 for more Plastics Kit information.

761810-001

Rubber Kit (includes base enclosure rubber feet)

761811-001

Screw Kit

762219-001

System board equipped with an Intel Core i5-4200U 1.60-GHz processor (dual core, 15 W, 3-MB
L3 cache), a graphics subsystem with UMA memory, and a non-Windows 8 operating system
(includes replacement thermal material)

Sequential part number listing

21

Summary of Contents for g14


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands