manualshive.com logo in svg

HP g14, Maintenance And Service Manual

Share
Download
HP g14 Maintenance And Service Manual Download Page 54

11.

Remove the top cover 

(2)

.

Reverse this procedure to install the top cover.

TouchPad button board

Description

Spare part number

TouchPad button board (includes TouchPad cable, TouchPad button board cable, and double-
sided adhesive)

767331-001

Before removing the TouchPad button board, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the Battery (see 

Battery on page 29

), and then remove the following components:

a.

Service cover (see 

Service cover on page 30

)

b.

Hard drive (see 

Hard drive on page 31

)

c.

Optical drive (see 

Optical drive on page 38

)

d.

Keyboard (see 

Keyboard on page 40

)

e.

Top cover (see 

Top cover on page 43

)

Remove the TouchPad button board:

1.

Turn the top cover upside down with the front toward you.

2.

Release the ZIF connector 

(1)

 to which the TouchPad cable is attached, and then disconnect the

TouchPad cable 

(2)

 from the TouchPad board.

46

Chapter 6   Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for g14


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands