HP FlexFabric 5950 Series Installation Manual Download Page 65

Page: 65 / 76

LED mark

Status

Description

command. The LED then flashes blue at 3 Hz.

Off

The switch is powered off or has failed to start up.

QSFP28 port LED

Table 32 QSFP28 port LED description

LED status

Description

Steady green

A transceiver module or network cable has been correctly installed. The port
has a link and is operating at 100 Gbps.

Flashing green

The port is sending or receiving data at 100 Gbps.

Steady yellow

A transceiver module or network cable has been correctly installed. The port
has a link and is operating at 10 Gbps, 25 Gbps, or 40 Gbps.

Flashing yellow (3 Hz)

The port is sending or receiving data at 10 Gbps, 25 Gbps, or 40 Gbps.

Off

No transceiver module or network cable has been installed or no link is present
on the port.

SFP28 port LED

Table 33 SFP28 port LED description

LED status

Description

Steady green

A transceiver module or cable has been correctly installed. The port has a link
and is operating at 25 Gbps.

Flashing green

The port is sending or receiving data at 25 Gbps.

Steady yellow

A transceiver module or cable has been correctly installed. The port has a link
and is operating at 10 Gbps.

Flashing yellow (3 Hz)

The port is sending or receiving data at 10 Gbps.

Off

No transceiver module or cable has been installed or no link is present on the
port.

SFP+ port LED

Each SFP+ port has a status LED to show port operating status and activities.

Table 34 SFP+ port LED description

LED status

Description

Steady green

A transceiver module or network cable has been correctly installed. The port
has a link and is operating at 10 Gbps.

Flashing green

The port is sending or receiving data at 10 Gbps.

Steady yellow

A transceiver module or network cable has been correctly installed. The port
has a link and is operating at 1 Gbps.

Flashing yellow (3 Hz)

The port is sending or receiving data at 1 Gbps.

Summary of Contents for FlexFabric 5950 Series













































































Search results

Summary of Contents for FlexFabric 5950 Series

Reviews:

Related manuals for FlexFabric 5950 Series

Brands by name

Popular brands

HP FlexFabric 5950 Series, Installation Manual

Search results

Summary of Contents for FlexFabric 5950 Series

Reviews:

Related manuals for FlexFabric 5950 Series

Brands by name

Popular brands