22
lasts more than 10 seconds, the camcorder will keep
recording up to 2 minutes.
In this mode, the camcorder is in standby mode until event
happens. This mode will consume more battery power.
•
Vibration Detection:
-
If disconnected external power supply when the camcorder is
powered on, the system alert message “
Press OK to power
off or enter Vibration Detection after 10 sec.
” This means
the system will power off and enter Vibration Detection
automatically in 10 seconds.
-
Once Vibration Detection Mode is triggered, when the
camcorder detects any vibration, it will automatically power
on and start recording, the event will be recorded for 60
seconds (per file).
-
In this mode, car camcorder is powered off until event
happens. This mode is more power saving.
•
Off:
No parking monitoring activated.
4.
Press the
button to return to recording screen.
Note:
1. When
Motion Detection
or
Vibration Detection
triggers, the camcorder records
events taken by front camera only.
2. If battery in a fully charged condition, it can record about 30 minutes video in
Motion
Detection
mode. As the camcorder is used, the battery storage capacity will decrease
gradually. This is a normal phenomenon for the battery.
3. The video files taken in Motion Detection mode will be saved in normal recording
folder.
4. The video files taken in Vibration Detection mode will be saved in Event recording
folder, which will not be overwritten by normal video files.
Summary of Contents for f770
Page 1: ...f770 Car Camcorder User Manual ...
Page 8: ...7 1 3 Product Overview ...