manualshive.com logo in svg

HP ENVY x360 Convertible PC, Maintenance And Service Manual, Page: 64 / 96

Share
Download
HP ENVY x360 Convertible PC Maintenance And Service Manual Download Page 64

3.

The touch screen display cable connects to the board at the bottom of the bezel. To disconnect the 
touch screen display cable from the display bezel, pull the cable upward to disconnect.

NOTE:

The touch screen display cable is available in the cable kit using spare part number 

809388-001 for FHD panels.

4.

The display/webcam cable connects to the bottom of the display panel. To remove the display/webcam 
cable:

NOTE:

The display/webcam cable is available in the cable kit using spare part number 809388-001 for 

FHD models.

a.

Position the display bezel/display panel assembly upside-down.

b.

Disconnect the display cable from the connector at the bottom of the display panel (1).

c.

Disconnect the webcam cable from the webcam (2).

d.

Remove the cable from the routing path and clips along the right side of the display bezel (3).

56

Chapter 5   Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for ENVY x360 Convertible PC

































































































Reviews:

No comments