HP ENVY x360 Convertible PC Maintenance And Service Manual Download

Page: 41 / 96

TouchPad board

Description

Spare part number

Touchpad board (includes cable)

809387-001

Before removing the touchpad board, follow these steps:

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

Remove the top cover (see

Top cover on page 28

Remove the touchpad board:

Position the top cover upside-down.

Remove the three Phillips PM2.0×2.0 broadhead screws (1) that secure the TouchPad board to the
computer.

Lift to disengage the cable from the adhesive securing it to the computer (2).

Separate the touchpad board from the top cover by pulling it downward away from the top cover (3).

Reverse this procedure to install the touchpad board.

Component replacement procedures

Summary of Contents for ENVY x360 Convertible PC

































































































Search results

Summary of Contents for ENVY x360 Convertible PC

Reviews:

Related manuals for ENVY x360 Convertible PC

Brands by name

Popular brands

HP ENVY x360 Convertible PC, Maintenance And Service Manual

Search results

Summary of Contents for ENVY x360 Convertible PC

Reviews:

Related manuals for ENVY x360 Convertible PC

Brands by name

Popular brands