HP ENVY x360 Convertible PC Maintenance And Service Manual Download Page 10

Page: 10 / 96

Category

Description

Dual speakers

Bang & Olufsen

Ethernet

Gigabit LAN

Wireless

Integrated wireless options with dual antenna (Half Mini Card):

Compatible with Miracast-certified devices

Intel WiDi 5.0 support

●

Intel Dual Band Wireless-AC 3160 802.11ac 1×1 WiFi + BT 4.0 Combo Adapter

●

Intel Dual Band Wireless-AC 7265 802.11 ac 2x2 WiFi + BT 4.0 Combo Adapter (non vPRO)

External media cards

HP Multi-Format Digital Media Card Reader with push-push technology. Supports SD/SDHC/SDXC.

Ports

AC adapter: HP Smart pin plug (4.5-mm barrel)

Audio: one combo audio-out (headphone)/audio-in (microphone) jack

HDMI: v. 1.4, supporting up to 1080p, 1920×1080 at 60 Hz

RJ-45/Ethernet

(2) USB 3.0 (right side)

(1) USB 2.0 (left side)

Keyboard/pointing
devices

Full size dura coat backlit keyboard with numeric keypad

Touchpad requirements:

HP Control Zone Trackpad

Taps enabled as default

Multitouch gestures enabled – ability to turn on and off

Support for PS/2 and SMBus

Support for Windows 8.1 Modern TouchPad Gestures

Power requirements

Support for 45-W Smart AC adapter (using 4.5 mm plug) with localized cable plug support

1 meter power cord

Supports the following batteries:

●

Prismatic 3-cell, 43.5-Wh, Li-ion battery

Security

Kensington Lock slot

TPM 2.0 support (5th generation processors)

Operating system

Preinstalled:

Windows 10

Serviceability

End user replaceable parts:

●

AC adapter

Chapter 1 Product description

Summary of Contents for ENVY x360 Convertible PC

































































































Search results

Summary of Contents for ENVY x360 Convertible PC

Reviews:

HP ENVY x360 Convertible PC, Maintenance And Service Manual, Page: 10 / 96

Search results

Summary of Contents for ENVY x360 Convertible PC

Reviews: