Touchscreen board cable
Description
Spare part number
Touchscreen board cable (includes double-sided adhesive)
L05095-001
Before removing the Touchscreen board cable, follow these steps:
1.
Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the tablet.
3.
Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4.
Remove the display panel assembly (see
Display panel assembly on page 32
), and then remove
the following components:
▲
Battery (see
)
Remove the Touchscreen board cable:
1.
Remove the two Phillips PM2.0×2.5 screws (1) that secure the bracket to the enclosure, and then
remove the bracket (2).
2.
Release the ZIF connector (3) to which the Touchscreen board cable is connected, and then disconnect
the Touchscreen board cable from the system board.
3.
Detach the Touchscreen board cable (4) from the back cover. (The Touchscreen board cable is attached
to the back cover with double-sided adhesive.)
4.
Remove the Touchscreen board cable.
Reverse this procedure to install the Touchscreen board cable.
42
Chapter 5 Removal and replacement procedures
Summary of Contents for ENVY x2
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...
