Touchscreen board
Description
Spare part number
Touchscreen board
NOTE:
The Touchscreen board spare part kit does not include the Touchscreen board cable. The
Touchscreen board cable is available using spare part number L05095-001.
L05114-001
Before removing the Touchscreen board, follow these steps:
1.
Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the tablet.
3.
Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4.
Remove the display panel assembly (see
Display panel assembly on page 32
Remove the Touchscreen board:
1.
Detach the piece of grounding tape that secures the Touchscreen board (1) to the display
panel assembly.
2.
Release the two ZIF connectors (2) to which the Touchscreen board cables are connected, and then
disconnect the Touchscreen board cables from the display panel assembly (3).
3.
Detach the Touchscreen board (4) from the display panel assembly. (The Touchscreen board is attached
to the display panel assembly with double-sided adhesive.)
4.
Remove the Touchscreen board.
Reverse this procedure to install the Touchscreen board.
Component replacement procedures
35
Summary of Contents for ENVY x2
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...
