CAUTION:
To prevent information loss or an unresponsive system:
Before removing or installing a drive, shut down the computer. If you are unsure whether the
computer is off or in the Sleep state, turn the computer on, and then shut it down through the
operating system.
1.
Save your work and shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Unplug the power cord from the AC outlet.
4.
Turn the computer upside down on a flat surface.
5.
Remove the battery from the computer.
Remove the hard drive:
1.
Loosen the service door screw
(1)
, and then slide the battery release latch
(2)
until the service
door is released.
2.
Slide the door out of the slot
(3)
, and then lift up and remove the door
(4)
.
3.
Remove the 4 screws
(1)
from the hard drive.
4.
Disconnect the hard drive cable
(2)
from the system board.
Improving performance
55
