Removing the heat sink
The heat sink is secured to the system board, under the heat sink shield.
To remove the heat sink:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 19
).
2.
Remove the computer head unit from the stand (
Removing and attaching the Engage One head unit to
3.
Remove the display panel from the computer head unit (
Removing the display panel on page 41
4.
In the order indicated on the heat sink, loosen the five captive Phillips screws that secure the heat sink
to the system board (1) - (5).
5.
Lift the heat sink off the system board (6).
CAUTION:
To reduce a degradation in thermal performance, be sure not to touch the thermal grease
on the surface of the processor or the heat sink.
To replace the heat sink, reverse the removal procedures.
Removing the heat sink
51
Summary of Contents for Engage One Retail System 143
Page 4: ...iv Safety warning notice ...
