●
Holding the column with the door side up, ensure that the stand cable is on the far side of the alignment
rod (1).
While holding the paper feed actuator arm down, slide the printer engine into the column until the
actuator arm is visible through hole (2).
●
With the alignment stud oriented toward the top of the column, place the paper feed button into the
opening in the column (1).
Continue sliding the printer engine into the column until the button is fully engaged and the engine is
fully seated (2).
40
Chapter 4 Removal and replacement procedures
Summary of Contents for Engage One Retail System 143
Page 4: ...iv Safety warning notice ...
