manualshive.com logo in svg

HP EliteDesk 800 G3, Maintenance And Service Manual

The HP EliteDesk 800 G3 offers high performance and versatility. To assist with any disassembly or repairs, you can easily access the comprehensive Disassembly Instructions Manual. This informative manual is available for free download on our website, ensuring proper maintenance and maximum productivity for your EliteDesk 800 G3.

Share
Download
background image

Table 5-3

  Computer Setup—Advanced (for advanced users) (continued)

Option

Heading

Interrupt B

Lets you specify the address. Default is enabled.

Lets you disable the following ports (default is enabled):

●

SATA connectors

●

Front USB ports

●

Rear USB ports

●

USB Legacy Port Charging

Enables USB charging port capability when the system is in hibernate or shutdown state.

●

Front USB Type-C Downstream Charging

Enables USB charging port capability when the system is in hibernate or shutdown state.

Restrict USB Devices

Specify the following categories of USB devices to enable:

●

Allow all USB devices (default)

●

Allow only keyboard and mouse

●

Allow all but storage devices and hubs.

When some devices are restricted, the system will disable USB ports that do not meet the allowed 
criteria. This feature is usually combined with similar policies within the operating system since USB 
devices can be moved to different ports. The ports disabled by the BIOS will remain disabled until the 
system is restarted.

USB Type-C Controller Firmware Update

Default is enabled.

Option ROM Launch 
Policy

These policies control whether Legacy Option ROMs or UEFI drivers are loaded. Default is ‘All legacy’ for 
Windows 7 and other non-Windows configurations. Default is ‘All UEFI’ for Windows 10 or later.

Configure Option ROM Launch Policy

●

All legacy

●

All UEFI

●

All UEFI except video

Power Management 
Options

Runtime Power Management (enable/disable)

Allows certain operating systems to reduce processor voltage and frequency when the current software 
load does not require the full capabilities of the processor. Default is enabled.

Extended Idle Power States (enable/disable)

Allows certain operating systems to decrease the processors power consumption when the processor is 
idle. Default is enabled.

S5 Maximum Power Savings (enable/disable)

Enabling this feature reduces the power of the system as much as possible in the S5 state. Power is 
removed from the wake up circuitry, the expansion slots, and any management features while in S5. 
Default is disabled.

SATA Power Management (enable/disable)

Enables or disables SATA bus and/or device power management. Default is enabled.

84

Chapter 5   Computer Setup (F10) Utility

Summary of Contents for EliteDesk 800 G3






































































































































































Reviews:

No comments

Related manuals for EliteDesk 800 G3

Brands by name

Popular brands

Load more brands