manualshive.com logo in svg

HP EliteDesk 800 G3, Maintenance And Service Manual

The HP EliteDesk 800 G3 offers high performance and versatility. To assist with any disassembly or repairs, you can easily access the comprehensive Disassembly Instructions Manual. This informative manual is available for free download on our website, ensuring proper maintenance and maximum productivity for your EliteDesk 800 G3.

Share
Download
background image

Front I/O and power switch assembly

The front I/O and power switch assembly is attached to the front of the chassis with one screw. Pull the 
assembly away from the front of the chassis to remove.

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 19

).

2.

Remove the computer access panel (

Access panel on page 20

).

3.

Remove the front bezel (

Front bezel on page 21

).

4.

Remove the drive cage (

Drive cage on page 28

).

5.

From the inside of the computer, disconnect the cables from the following system board connectors:

●

FRONT USB (blue connector)

●

PB/LED (black connector)

●

FRONT USB 3.1 (blue connector)

●

FRONT USB 3.1 TYPE C (black connector)

●

FRONT USB (yellow connector)

Front I/O and power switch assembly

55

Summary of Contents for EliteDesk 800 G3






































































































































































Reviews:

No comments

Related manuals for EliteDesk 800 G3

Brands by name

Popular brands

Load more brands