manualshive.com logo in svg

HP EliteDesk 800 G3, Maintenance And Service Manual

The HP EliteDesk 800 G3 offers high performance and versatility. To assist with any disassembly or repairs, you can easily access the comprehensive Disassembly Instructions Manual. This informative manual is available for free download on our website, ensuring proper maintenance and maximum productivity for your EliteDesk 800 G3.

Share
Download
background image

Table 5-3

  Computer Setup—Advanced (for advanced users) (continued)

Option

Heading

Controls the virtualization features of the processor. Changing this setting requires turning the computer 
off and then back on. Default is disabled.

Virtualization Technology for Directed I/O (VTd) (Intel only)

Controls virtualization DMA remapping features of the chipset. Changing this setting requires turning the 
computer off and then back on. Default is disabled.

PCI Express Slot x (enable/disable)

Lets you disable individual expansion slots. Default is enabled.

M.2 WLAN/BT

Lets you disable the wireless module slot. Default is enabled.

M.2 SSD

Lets you disable the M.2 solid-state drive slot. Default is enabled.

Allow PCIe/PCI SERR# Interrupt (enable/disable)

Allows PCI devices to report PCI/PCIe System Error signals, such as address parity errors, data parity 
errors, and critical errors other than parity. Default is enabled.

Power Button Override (disable/4 sec/15 sec)

Lets you disable or enable and select the number of seconds you have to hold down the power button for 
it to force the system to power off. Default is ‘4 sec’.

Built-In Device Options

Embedded LAN Controller

Select to show the device in the operating system. Default is enabled.

Wake On LAN

Lets you either disable the Wake On LAN feature, or configure where the computer boots, including the 
network or hard drive. Default is Boot to Network.

Dust Filter

Select to enable the Dust Filter replacement reminder, which can be set for 15, 30, 60, 90, 120, or 180 
days. The reminder will show during POST after the reminder timer has expired.

Video Memory Size

Use this option to manage graphics memory allocation. The value you choose is allocated permanently to 
graphics and is unavailable to the operating system.

Audio Device

Select to show the device in the operating system. Default is enabled.

Internal Speakers (does not affect external speakers)

Clear to disable the chassis speaker or speakers. This function is applicable to normal audio playback in 
the operating system and does not affect the error or warning beeps during POST. Default is enabled.

Increase Idle Fan Speed(%)

Sets idle fan speed percentage. This setting only changes the minimum fan speed. The fan is still 
automatically controlled.

Port Options

Serial Port B

Lets you disable the port. Default is enabled.

I/O Address B

Lets you specify the address. Default is enabled.

Computer Setup (F10) Utilities

83

Summary of Contents for EliteDesk 800 G3






































































































































































Reviews:

No comments

Related manuals for EliteDesk 800 G3

Brands by name

Popular brands

Load more brands