Installing a 9.5 mm slim optical drive
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 17
2.
Remove the access panel (
)
3.
If you are installing a slim optical drive in a bay covered by a bezel blank, remove the front bezel and
then remove the bezel blank. See
Removing bezel blanks on page 22
for more information.
4.
Align the small pin on the release latch with the small hole on the side of the drive and press the latch
firmly onto the drive.
5.
Slide the optical drive through the front of the chassis (1) all the way into the bay so that the green latch
locks onto the chassis frame (2).
44
Chapter 4 Removal and replacement procedures
