11.
If it is necessary to replace the display bezel or display hinges, remove the following:
(1)
Four rubber screw covers on the display bezel top edge
(2)
Two rubber screw covers on the display bezel bottom edge
(3)
Four Phillips PM2.5×5.0 screws on the display bezel top edge
(4)
Two Phillips PM2.5×5.0 screws on the display bezel bottom edge
NOTE:
See
Ambient light sensor on page 52
for display inverter replacement instructions.
12.
Flex the top
(1)
of the bezel, the inside edges of the left and right sides
(2)
, and then the bottom
(3)
of the bezel until it disengages from the display enclosure.
13.
Remove the display bezel
(4)
. The display bezel is available using spare part numbers
595747-001 (for use with computer models with a webcam), 595748-001 (for use with computer
models equipped without a webcam), and 595749-001 (for use with computer models equipped
with DreamColor displays).
Component replacement procedures
85
