Solid-state drive
Description
Spare part number
1 TB, PCIe, TLC
L31368-001
512 GB, PCIe, self-encrypting drive (SED), Opal 2, TLC
L31366-001
512 GB, PCIe, TLC
L31372-001
256 GB, PCIe, self-encrypting drive (SED), Opal 2, TLC
L31369-001
256 GB, PCIe, TLC
L31370-001
256 GB, PCIe
L31371-001
128 GB, SATA-3, TLC
L31367-001
Before removing the solid-state drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the following components:
a.
Display panel (see
)
b.
Disconnect the battery cable (see
Remove the solid-state drive:
▲
Using a PH Type #0 Phillips screwdriver, remove the Phillips M1.6x1.6 screw (1), and then remove the
solid-state drive (2).
IMPORTANT:
Be sure to use the correct size screwdriver to avoid stripping the screw.
Reverse this procedure to replace the solid-state drive.
38
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
