HP Elite x2 1013 G3 Maintenance And Service Manual Download Page 40

Page: 40 / 107

Nano SIM card

CAUTION:

To prevent damage to the connectors, use minimal force when inserting a nano SIM card.

CAUTION:

To prevent damage to a SIM card or a computer, do not change the size of a SIM card by cutting or

sanding the card.

NOTE:

SIM blank does not have hole and should be removed when the system board is removed.

Position the computer display-side up on a flat surface.

Insert the removal tool or a small straightened paper clip into the card tray access hole until the card
tray is ejected (1).

Remove the tray (2) from the computer and remove the card (3).

Replace the tray in the computer, and then press in gently on the tray (4) until it is firmly seated.

To install a SIM card, reverse the steps.

Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for Elite x2 1013 G3












































































































Search results

Summary of Contents for Elite x2 1013 G3

Reviews:

Related manuals for Elite x2 1013 G3

Brands by name

Popular brands

HP Elite x2 1013 G3, Maintenance And Service Manual

Search results

Summary of Contents for Elite x2 1013 G3

Reviews:

Related manuals for Elite x2 1013 G3

Brands by name

Popular brands