HP Elite Dragonfly Page 69 Maintenance And Service Manual Download | Manualshive

Page: 69 / 84

background image

Using Remote HP PC Hardware Diagnostics UEFI settings (select

products only)

Remote HP PC Hardware Diagnostics UEFI is a firmware (BIOS) feature that downloads HP PC Hardware
Diagnostics UEFI to your computer. It can then execute the diagnostics on your computer, and it might upload
results to a preconfigured server.

For more information about Remote HP PC Hardware Diagnostics UEFI, go to

http://www.hp.com/go/

techcenter/pcdiags

, and then select Find out more.

Downloading Remote HP PC Hardware Diagnostics UEFI

HP Remote PC Hardware Diagnostics UEFI is also available as a SoftPaq that you can download to a server.

Downloading the latest Remote HP PC Hardware Diagnostics UEFI version

You can download the latest HP PC Hardware Diagnostics UEFI version to a USB flash drive.

1.

Go to

http://www.hp.com/go/techcenter/pcdiags

. The HP PC Diagnostics home page is displayed.

2.

Select Download Remote Diagnostics, and then select Run.

Downloading Remote HP PC Hardware Diagnostics UEFI by product name or number

You can download HP Remote PC Hardware Diagnostics UEFI by product name or number.

NOTE:

For some products, you might have to download the software by using the product name or number.

1.

Go to

http://www.hp.com/support

2.

Select Software and Drivers, select your type of product, enter the product name or number in the
search box that is displayed, select your computer, and then select your operating system.

3.

In the Diagnostics section, follow the on-screen instructions to select and download the Remote UEFI
version for the product.

Customizing Remote HP PC Hardware Diagnostics UEFI settings

Using the Remote HP PC Hardware Diagnostics setting in Computer Setup (BIOS), you can perform several
customizations.

●

Set a schedule for running diagnostics unattended. You can also start diagnostics immediately in
interactive mode by selecting Execute Remote HP PC Hardware Diagnostics.

●

Set the location for downloading the diagnostic tools. This feature provides access to the tools from the
HP website or from a server that has been preconfigured for use. Your computer does not require the
traditional local storage (such as a hard drive or USB flash drive) to run remote diagnostics.

●

Set a location for storing the test results. You can also set the user name and password that you use for
uploads.

●

Display status information about the diagnostics run previously.

To customize Remote HP PC Hardware Diagnostics UEFI settings, follow these steps:

1.

Turn on or restart the computer, and when the HP logo appears, press

f10

to enter Computer Setup.

2.

Select Advanced, and then select Settings.

Using Remote HP PC Hardware Diagnostics UEFI settings (select products only)

61

«
...
67
68
69
70
71
...
»

Summary of Contents for Elite Dragonfly





















































































Reviews:

No comments

Related manuals for Elite Dragonfly

Visionbook 14WR

Brand: UMAX Technologies Pages: 73

Brand: MSI Pages: 102

Brand: MAD DOG Pages: 5

TravelMate Timeline 8371

Brand: Acer Pages: 31

Brand: Acer Pages: 16

Brand: Acer Pages: 75

Brand: Acer Pages: 75

Brand: Acer Pages: 2

Brand: Acer Pages: 72

Brand: Acer Pages: 25

Extensa 5230 Series

Brand: Acer Pages: 14

Chromebook Enterprise 514

Brand: Acer Pages: 14

Brand: Acer Pages: 50

Chromebook Spin 11 R751T

Brand: Acer Pages: 34

Brand: Acer Pages: 31

Brand: Acer Pages: 58

Brand: Acer Pages: 98

ENDURO Urban N3

Brand: Acer Pages: 79

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands