HP Elite Dragonfly Page 54 Maintenance And Service Manual Download

Page: 54 / 84

Remove the three Phillips M2.0 × 3.0 screws (1) that secure the fan to the computer.

Remove the three Phillips M2.0 × 3.0 screws (2) that secure the system board to the computer.

Rotate the system board up (3), and then pull the heat sink out from under the lip at the top of the
computer (4).

Reverse this procedure to install the system board.

WWAN antennas and cables

To remove the WWAN antennas and cables, use this procedure and illustration.

Table 5-14

WWAN antennas and cables description and part number

Description

Spare part number

WWAN antennas and cables

M48385-001

Chapter 5 Removal and replacement procedures for authorized service provider parts

Summary of Contents for Elite Dragonfly





















































































Search results

Summary of Contents for Elite Dragonfly

Reviews:

Related manuals for Elite Dragonfly

Brands by name

Popular brands

HP Elite Dragonfly, Maintenance And Service Manual

Search results

Summary of Contents for Elite Dragonfly

Reviews:

Related manuals for Elite Dragonfly

Brands by name

Popular brands