HP Elite Dragonfly Maintenance And Service Manual Download

Page: 47 / 84

Remove the fingerprint reader board from the computer (4).

Reverse this procedure to install the fingerprint reader board.

Audio board

To remove the audio board, use this procedure and illustration.

Table 5-8

Audio board description and part number

Description

Spare part number

Audio board (includes cable)

M42275-001

Before removing the audio board, follow these steps:

Prepare the computer for disassembly (

Preparation for disassembly on page 29

Remove the bottom cover (

Bottom cover on page 29

Disconnect the battery cable from the system board (see

Battery on page 30

Remove the audio board:

Disconnect the cable from the ZIF connector on the system board (1).

Component replacement procedures

Summary of Contents for Elite Dragonfly





















































































Search results

Summary of Contents for Elite Dragonfly

Reviews:

Related manuals for Elite Dragonfly

Brands by name

Popular brands

HP Elite Dragonfly, Maintenance And Service Manual

Search results

Summary of Contents for Elite Dragonfly

Reviews:

Related manuals for Elite Dragonfly

Brands by name

Popular brands