HP DL360 - ProLiant - Photon Setup And Installation Manual Download Page 49

Page: 49 / 118

Server Installation

3-4

HP ProLiant DL360 Generation 3 Server Setup and Installation Guide

HP CONFIDENTIAL

Writer: Richard O. Heath File Name: d-ch3 Server Installation.doc

Codename: Ertl Part Number: 293974-001 Last Saved On: 10/11/02 11:19 AM

Carefully align the two front tabs on the front of the universal rack rail with the
holes identified at the front of the rack.

Insert the front tabs of the universal rack rail into the rack.

Figure 3-3: Aligning and inserting the universal rack rail

Compress the universal rail rack toward the front of the rack until the rear tabs
are aligned with the inner holes at the back of the rack.

NOTE:

Adjust the depth of the rack rail to match the rack model by using the rack depth

indicators on the rail.

Insert the rear tabs into the rear holes, and release the rail. The rail should lock in
place securely.

Repeat steps 2 through 6 for the second universal rack rail.

Summary of Contents for DL360 - ProLiant - Photon























































































































Search results

Summary of Contents for DL360 - ProLiant - Photon

Reviews:

Related manuals for DL360 - ProLiant - Photon

Brands by name

Popular brands

HP DL360 - ProLiant - Photon, Setup And Installation Manual

Search results

Summary of Contents for DL360 - ProLiant - Photon

Reviews:

Related manuals for DL360 - ProLiant - Photon

Brands by name

Popular brands