Installing Hardware Options
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
2-15
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: c-ch2 Installing Hardware Options.doc
Codename: Ertl Part Number: 293974-001 Last Saved On: 10/16/02 1:34 PM
Installing Hot-Plug Hard Drives
To install a hot-plug hard drive:
IMPORTANT:
The ProLiant DL360 Generation 3 server supports HP universal U320 drives
only. The Compaq branded Ultra3 or HP branded U160 hot-plug drives are not supported.
NOTE:
If installed, remove the hard drive blank from the server.
1.
Slide the hard drive into the open bay (1).
2.
Close the drive latch to secure the hard drive into the server (2).
Figure 2-10: Installing a hot-plug hard drive