HP DL360 - ProLiant - Photon Setup And Installation Manual Download Page 14 | Manualshive

Page: 14 / 118

background image

Planning the Server Installation

1-2

HP ProLiant DL360 Generation 3 Server Setup and Installation Guide

HP CONFIDENTIAL

Writer: Richard O. Heath File Name: b-ch1 Planning the Server Installation.doc

Codename: Ertl Part Number: 293974-001 Last Saved On: 10/11/02 11:15 AM

3.

Install PCI or PCI-X expansion boards (optional).

4.

Install other options.

Other options include additional memory, hard drives, a second processor, a
second hot-plug power supply, and external storage devices. Refer to Chapter 2,
“Installing Hardware Options.”

Before running the System Configuration Utility, install hardware options.
Installation of additional memory and most PCI boards can be done after the
System Configuration Utility is run. The System Configuration Utility is run
during the SmartStart portion of the installation sequence.

IMPORTANT:

Do not attempt to change the factory settings for reserved switches.

Inaccurate settings can seriously degrade system performance.

5.

Set internal switches, if necessary. For detailed information on relevant switches,
refer to Appendix E, “LEDs, Switches, and Jumpers.”

6.

Use the rack template to identify the proper location for server installation. Refer
to “Measuring with the Template,” in Chapter 3, “Server Installation.”

7.

Install the universal rack rails. Refer to “Installing the Universal Rack Rails” in
Chapter 3, “Server Installation.”

8.

Mount the server in the rack. Refer to “Installing the Server into the Rack,” in
Chapter 3, “Server Installation.”

9.

Install the fixed cable tray for managing cables on the server rear panel.

These cables include keyboard, mouse, monitor, network, and power cables.
Refer to “Attaching the Fixed Cable Tray,” in Chapter 3, “Server Installation.”

10.

Connect the power cord and peripheral devices. Refer to “Connecting the
Peripheral Device Cables and the Power Cord,” in Chapter 3, “Server
Installation.”

11.

Secure the power cord and peripheral device cables in the fixed cable tray. Refer
to “Securing the Cables in the Cable Tray,” in Chapter 3, “Server Installation.”

«
...
12
13
14
15
16
...
»

Summary of Contents for DL360 - ProLiant - Photon























































































































Reviews:

No comments

Related manuals for DL360 - ProLiant - Photon

Brand: Vantec Pages: 15

PoE Injector Adapter POE-32001T

Brand: UNICOM Pages: 1

Brand: Paradyne Pages: 5

Brand: Paradyne Pages: 14

Brand: Paradyne Pages: 1

Brand: Nextech Pages: 7

Brand: Cables to Go Pages: 21

Brand: KSH International Pages: 18

Brand: Campbell Pages: 6

Brand: J-Tech Digital Pages: 16

Brand: Crown Pages: 12

Brand: Allen-Bradley Pages: 12

Brand: AudioCodes Pages: 3

Brand: Compaq Pages: 167

Brand: Tumi Pages: 127

Brand: Belkin Pages: 76

Brand: Extron electronics Pages: 6

Brand: Polon-Alfa Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands