manualshive.com logo in svg

HP Deskpro AP550, Maintenance And Service Manual

The HP Deskpro AP550 Reference Manual is a comprehensive guide for users of the AP550 model. It provides valuable information on setup, troubleshooting, and maintenance. Download this manual for free from our website to maximize your product experience.

Share
Download
background image

Diagnostic Tools  

4-47

 

Compaq Restore CD

 

The Compaq Restore CD is a set of Compaq-specific drivers and Compaq value added software
that enables the workstation to operate at optimum performance. Updates are available on the
Compaq website at 

www.compaq.com

 and through a subscription to the Compaq Support

Software CD Kit.

Updates for the restore CD are not available on the web or through subscription. It only ships
with the unit. There is a Support Software CD that is available through paid subscription but it is
a separate product.

 

The Compaq Restore CD performs a complete restore. That is, every time the Restore CD is
used the system will be erased and then will restore the entire operation system, drivers, and
Compaq value added software. The initial release of the Compaq Restore CD included with the
workstation contains the following support software drivers:

■

 

Network controller driver

■

 

SCSI controller driver

■

 

Graphics display driver

■

 

Audio drivers

Summary of Contents for Deskpro AP550








































































































































































































Reviews:

No comments

Related manuals for Deskpro AP550

Wasp Barcode Technologies DR6 User Manual preview
DR6
Brand: Wasp Barcode Technologies Pages: 69
Jason.L Elements Workstation 3 Person Run Assembly Instructions preview
Elements Workstation 3 Person Run
Brand: Jason.L Pages: 5
ADLINK Technology MXC-2300 Manual preview
MXC-2300
Brand: ADLINK Technology Pages: 76
Rousseau W31-SE19B Assembly Manual preview
W31-SE19B
Brand: Rousseau Pages: 7
IBM Power 775 Service Procedure preview
Power 775
Brand: IBM Pages: 27
Amplicon Impact 1015 User Manual preview
Impact 1015
Brand: Amplicon Pages: 92
Neousys Technology NRU Series User Manual preview
NRU Series
Brand: Neousys Technology Pages: 73
Acer Power Series User Manual preview
Power Series
Brand: Acer Pages: 43
Acer Power SP Service Manual preview
Power SP
Brand: Acer Pages: 72
Acer Predator PO3-640 User Manual preview
Predator PO3-640
Brand: Acer Pages: 27
Acer Predator G Series User Manual preview
Predator G Series
Brand: Acer Pages: 52
Acer K10 Service Manual preview
K10
Brand: Acer Pages: 39
Acer Predator PO3-600 Upgrade Manual preview
Predator PO3-600
Brand: Acer Pages: 30
Acer Predator P09-600 User Manual preview
Predator P09-600
Brand: Acer Pages: 31
Acer PREDATOR ORION 3000 600 I9100 User Manual preview
PREDATOR ORION 3000 600 I9100
Brand: Acer Pages: 30
Acer N260G U2802CP - Veriton - 2 GB RAM User Manual preview
N260G U2802CP - Veriton - 2 GB RAM
Brand: Acer Pages: 22
Acer Veriton 7600G User Manual preview
Veriton 7600G
Brand: Acer Pages: 142
Acer Predator HELIOS 300 User Manual preview
Predator HELIOS 300
Brand: Acer Pages: 83

Brands by name

Popular brands

Load more brands