Mounting the device on a workbench
If a standard 19-inch rack is not available, you can place a device on a clean, flat workbench, as follows:
1.
Clean the recessed areas on the chassis bottom.
2.
Attach the four rubber feet to the recessed areas on the chassis bottom.
3.
Place the device on the workbench.
IMPORTANT:
Avoid placing heavy objects on the device.
Figure 4
Mounting the device on a workbench
Installing the device in a 19-inch rack
You can install the device in a 19-inch rack by using the following methods:
•
Installing the device by using front and rear mounting brackets
.
•
Installing the device by using front mounting brackets and a rack shelf
.
•
Installing the device by using front mounting brackets and slide rails
.
Mounting brackets
Figure 5
Front mounting bracket
9
