HP DESKJET 1050 User Manual Download Page 51

Page: 51 / 94

DVA

FAXI

DVANCED

XIN

DVANCED

FAXING

ANC

FAXING

DVA

FAXI

DVANCED

XIN

DVANCED

XIN

Advanced faxing 45

Polling

Polling enables you to set up a document so it can be retrieved at a later time. For
example, you can place the document in your machine, and the other party can retrieve
it when they are in the office or when their calling rates are lower.

Setting send polling

You can program your fax machine to send a document when it is requested by a
remote fax machine.

NOTE:

Your HP Fax allows you to set one poll job at a time and it can be retrieved

once.

Turn the document face down and feed it into the machine.

Press

Menu

repeatedly until

ADVANCED FAX

appears and press

Start/Enter

Select

Set Polling Send

by pressing

and press

Start/Enter

Poll Code [0000]

will display.

Enter the poll code you want to use for this document and press

Start/Enter

• The poll code is preset to 0000, which means that the receiver does not need to

enter a poll code to receive the document.

• The poll code is not static. You enter a new one for each document.

• The poll code is used to prevent your document from being retrieved by an

unauthorized caller.

• Your machine starts scanning the document(s) into memory and shows

POLLING

SEND

in the display. If the answer mode was TEL, the machine changes it to FAX

mode automatically.

• When it is polled, the page in memory will be deleted automatically. To cancel

Send Polling, see

To cancel the scheduled job

on page 46.

Summary of Contents for DESKJET 1050































































































Search results

Summary of Contents for DESKJET 1050

Reviews:

HP DESKJET 1050, User Manual, Page: 51 / 94

Search results

Summary of Contents for DESKJET 1050

Reviews: