
Digital message center (HP 1050 Fax only) 40
Remote Access
Toll Saver
Toll Saver allows you to tell whether or not there are new messages before the message
center answers the phone. This feature allows you to hang up before incurring phone
charges.
When Toll Saver is on and there are no new messages, the HP Fax adds two rings to the
Rings to Answer setting. For example, if Rings to Answer is set to 4, the device will ring 6
times before answering if there are no new messages. (See
Set rings to answer
on page
27.)
Follow these instructions to turn Toll Saver on and off.
1.
Press
Menu
repeatedly until
SET UP TAM
displays and press
Start/Enter
.
2.
Press
!"
until
Toll Saver
displays and press
Start/Enter
.
3.
Press
!"
until
On
displays and press
Start/Enter
.
#3
Skips to the next message.
#4
Allows you to change the Greeting. After entering the command, speak into the
handset. Press # when you are done. The device will play the Greeting for you so
you can confirm the recording.
#5
Plays back all the messages (old and new) one by one. After each message is
played, press * to hear the next message.
#6
Replays the current message.
#7
Erases the current message and plays the next one.
#8
Turns the message center on and off. When you turn it on, the Greeting is played.
#9
Erases all the messages. The device will beep twice when it’s done.
*
Plays the next message if entered the #5 or #2 command.
Table 4-1
Remote access commands
Code
Function
Summary of Contents for DESKJET 1050
